SVP-12 OPTIONAL MANIFOLD COMPONENTS

When used with a Pumping Attachment and filter, the Debris Trap prevents large particulates from entering the manifold body and vacuum pumps. An additional port is also available on the Debris Trap, which allows the addition of another rare gas attachment.

CLICK HERE TO ENLARGE

Debris Trap With 3^rd Gas Port

This is the same as the Standard Debris Trap but with the addition of a #7 Connector, which allows the use of a third Gas Delivery System.

CLICK HERE TO ENLARGE

Debris/Vent Trap With 0-12mm Isolation Stopcock

This component provides the same benefits as the Standard Debris Trap. The addition of the 0-12mm Isolation Stopcock and separate air vent stopcock allows the main manifold body to be isolated while connecting units for processing. It is most useful by adding one to each side of the manifold for alternate side to side pumping.

  CLICK HERE TO ENLARGE

Debris/Vent Trap With 0-12mm Isolation Stopcock & Extra Gas Port also available

Double Fixed Arm Pumping Attachment

The Double Fixed Arm Pumping Attachment provides a fast, high vacuum connection of 1 or 2 units to the manifold for processing. All Pumping Attachments use our #7 Threaded Glass Compression O-Ring Connectors for connecting 5mm or 6mm tubulation to the manifold. The high vacuum connection eliminates the need for welding the tubulation to the manifold. Each Pumping Attachment is supplied with SVP’s special Heat Resistant compression caps, which allows the tipping torch to be used in close proximity to the cap without melting it.

  CLICK HERE TO ENLARGE

Single Fixed Arm Pumping Attachment also available

Double Swivel Arm Pumping Attachment

The Double Swivel Arm Pumping Attachment provides a fast, high vacuum connection of 1 or 2 units to the manifold for processing. The integration of O-ring sealed ball and socket joints into the design allows the arms to move up and down more than 90° and side to side approximately 30°, which makes alignment with the tubulation easier.

  CLICK HERE TO ENLARGE

Single Swivel Arm Pumping Attachment also available

Double Fixed Arm Pumping Attachment With
0-12mm Roughing Pump Stopcock

This component is used in conjunction with a Debris/Vent Trap With Isolation Stopcock. The Roughing Pump Stopcock is connected to a separate mechanical vacuum pump. It is used while processing and for rough pumping the unit(s) immediately following bombarding. This allows the main manifold section to remain under vacuum while processing, thereby keeping it cleaner longer and providing a better ultimate vacuum.

Vacuum Gauge Stopcock

The Vacuum Gauge Stopcock is required whenever a high vacuum gauge is used. A standard ⅛” NPT vacuum gauge tube (sensor) connects to the stopcock assembly with a proprietary Threaded Glass Compression O-Ring Connector, making a high vacuum connection. The stopcock allows the vacuum gauge tube to be isolated from the manifold while bombarding, as well as protecting the gauge tube from the influx of debris and contaminants, which are a normal result of the processing procedure.

  CLICK HERE TO ENLARGE

Additional components are listed in our Price List. Contact us for your Free copy.